APSC Drilling Engineer Recruitment 2026 Apply Online Assam

APSC Drilling Engineer Recruitment 2026 notification has been officially released by the Assam Public Service Commission (APSC), Jawaharnagar, Khanapara, Guwahati vide Advertisement No. 06/2026 and Memo No. 99PSC/DR-51/3/2026-27, dated 12 June 2026. A total of 01 vacancy for the post of Drilling Engineer in the Directorate of Geology and Mining, Assam under the Mines and Minerals Department, Government of Assam has been notified for direct recruitment. Eligible Indian citizens who are permanent residents of Assam can apply online from 24 June 2026 to 23 July 2026 through the official APSC recruitment portal apscrecruitment.in. This is a solid opportunity for Mechanical Engineering graduates looking for a reputed state government technical job in Assam under Pay Band-4.


.

APSC Drilling Engineer Recruitment 2026 Overview – Apply Online for Drilling Engineer Post in Directorate of Geology and Mining Assam

ParticularDetails
OrganisationAssam Public Service Commission (APSC)
Advertisement No.06/2026, Dated: 12 June 2026
Memo No.99PSC/DR-51/3/2026-27
Post NameDrilling Engineer
DepartmentDirectorate of Geology and Mining, Assam (Mines and Minerals Dept.)
Total Vacancies01 (One)
Pay ScaleRs. 30,000/- to Rs. 1,10,000/- + Grade Pay Rs. 12,700/- (Pay Band – 4)
Application ModeOnline (apscrecruitment.in)
Job TypeAssam State Government Job (Direct Recruitment)
Application Start Date24 June 2026
Last Date to Apply Online23 July 2026
Last Date for Fee Payment25 July 2026
Domicile RequiredPermanent Resident of Assam
Official Websiteapscrecruitment.in

APSC Drilling Engineer Recruitment 2026 is a direct recruitment opportunity under the Mines and Minerals Department of the Assam State Government. This is a technical post under the Directorate of Geology and Mining placed in Pay Band-4, which is among the better pay structures for state government engineering jobs. Mechanical Engineering graduates and AMIE holders who are permanent residents of Assam must go through the complete eligibility details and apply before the closing date.

APSC Drilling Engineer 2026 – Category Wise Vacancy Breakup

The single vacancy notified for the post of Drilling Engineer under APSC Recruitment 2026 is distributed as follows:

Post NameOpen (UR)OBC/MOBCTT & AdivasiSCSTPSTHGrand TotalPwBD ReservedEx-Servicemen
Drilling Engineer – Directorate of Geology and Mining, Assam 010000000000010000

Note: The single vacancy falls under the Open/Unreserved category. There is no reservation for PwBD or Ex-Servicemen in this post. PwBD candidates may still apply but will have to compete along with all other candidates without any separate reservation benefit. Reservation details are as per the draft advertisement furnished by the Government of Assam.

APSC Drilling Engineer Recruitment 2026 – Eligibility Criteria, Domicile and Educational Qualification

Citizenship and Domicile:

The candidate must be an Indian Citizen as defined in Articles 5 to 8 of the Constitution of India and must be a permanent resident of Assam. As domicile proof, the candidate must upload a copy of the valid Permanent Resident Certificate issued in Assam for educational purpose. An Employment Exchange Registration Certificate issued in Assam will also be accepted as proof of residency.

Educational Qualification:

Post NameRequired Qualification
Drilling EngineerGraduation in Mechanical Engineering from any University or Institution recognised by the Government
OR
Passed Part A & B of AMIE (India) in Mechanical Engineering, provided the candidate had enrolled in the AMIE course on or before 31 May 2013

Candidates must upload all semester/year-wise mark sheets along with the final pass certificate at the time of applying online. The OTR (One Time Registration) profile on the APSC portal must be updated with all educational details before filling the application form, as the Commission fetches certificates related to age, caste, and minimum educational qualification from the OTR profile directly.

APSC Drilling Engineer 2026 – Age Limit Details as on 01 January 2026

The age limit for APSC Drilling Engineer Recruitment 2026 is calculated as on 01 January 2026. Below is the complete category-wise age limit:

CategoryMinimum AgeMaximum Age
General / Unreserved (UR)21 Years38 Years
SC / ST Candidates21 Years43 Years (5 years relaxation)
OBC / MOBC Candidates21 Years41 Years (3 years relaxation)
Persons with Benchmark Disabilities (PwBD)21 Years48 Years (10 years relaxation, irrespective of category)

Age will be verified only from the Class-X / Class-XII Examination Admit Card / Pass Certificate / Marksheet issued by a recognised Central or State Board/Council where the Date of Birth is clearly reflected. No other document will be accepted for age proof. The date of birth entered in the online application form is final — no subsequent request for any correction will be entertained.

OBC/MOBC age relaxation is governed by Government Notification No. ABP.6/2016/9 dated 25th April 2018. PwBD relaxation is as per Government Memorandum No. ABP 144/95/121 dated 28th October 2015.

APSC Drilling Engineer Recruitment 2026 – Salary, Pay Scale and Pay Band Details

Post NamePay ScaleGrade PayPay Band
Drilling Engineer – Directorate of Geology and MiningRs. 30,000/- to Rs. 1,10,000/-Rs. 12,700/-Pay Band – 4

In addition to the pay scale, the selected candidate will also receive all standard allowances such as Dearness Allowance (DA), House Rent Allowance (HRA), Travel Allowance (TA), and other benefits as admissible to Assam State Government employees from time to time. Pay Band-4 with Grade Pay of Rs. 12,700/- is a senior technical pay structure, making the APSC Drilling Engineer post a financially rewarding government engineering job in Assam for 2026.

APSC Drilling Engineer 2026 – Application Fee and Payment Details

S.NoCategoryApplication FeeProcessing Fee (CSC-SPV)Total Amount Payable
1General / UnreservedRs. 250/-Rs. 47.20/-Rs. 297.20/-
2OBC / MOBCRs. 150/-Rs. 47.20/-Rs. 197.20/-
3SC / ST / BPL / PwBDNILRs. 47.20/-Rs. 47.20/-

The application fee can be paid online via Net Banking, Debit Card, or Credit Card through the APSC recruitment portal. Candidates who do not have internet banking or card facilities can pay through the nearest Common Service Centre (CSC). Applications without fee payment will be summarily rejected and no representation against such rejection will be entertained. The fee once paid is strictly non-refundable and will not be carried forward to any other APSC examination or selection. In the event of a double debit or transaction failure, the bank will automatically reverse the extra amount within 5 to 7 working days. For payment-related queries, contact the GRAS Helpdesk at 1800-102-1686 (10:00 AM to 6:00 PM, all working days).

APSC Drilling Engineer Recruitment 2026 – Selection Process Details

The selection process for APSC Drilling Engineer Recruitment 2026 will be announced separately by the Commission after the application window closes. Based on the total number of applications received, the Commission will decide the mode of selection, which may include:

  • Screening / Written Examination: If the number of applications is large, a written/screening test may be held before the interview. The exam, if conducted, may be held zone-wise across Assam. The exact schedule will be notified on apscrecruitment.in.
  • Viva-Voce / Personal Interview: Shortlisted candidates will be called for a personal interview or Viva-Voce at a place fixed by the Commission. No TA/DA will be provided for attending the interview.
  • Medical Examination: Candidates must be in sound health. If selected, they may be required to undergo a medical examination as directed by the State Government before final appointment.
  • Document Verification: All original certificates and documents must be produced at the time of the interview as per the intimation letter/admit card.

Important: Admission at all stages of selection is purely provisional. If at any stage it is found that the candidate does not fulfil the eligibility conditions, the candidature will be cancelled by the Commission. Canvassing in any form will straightaway disqualify the candidate. The Commission will also decide whether to conduct the exam zone-wise depending upon the number of candidates.

APSC Drilling Engineer 2026 – Zone Wise Examination Centres

Sl. No.ZoneDistricts Covered
1SilcharHailakandi, Sribhumi & Cachar
2JorhatGolaghat, Dibrugarh, Jorhat, Majuli, Charaideo, Sivasagar & Tinsukia
3NagaonDima Hasao, Hojai, Nagaon, Morigaon, Karbi Anglong & West Karbi Anglong
4TezpurBiswanath, Dhemaji, Lakhimpur, Sonitpur & Udalguri
5KokrajharBongaigaon, Chirang, Dhubri, Goalpara, Kokrajhar & South Salmara
6GuwahatiBarpeta, Baksa, Kamrup, Kamrup (Metro), Nalbari, Darrang, Bajali & Tamulpur

The Commission has the discretion to reduce or increase the number of exam zones depending upon the total number of candidates registered from each district.

APSC Drilling Engineer Recruitment 2026 – Important Dates

Notification Release Date12 June 2026
Online Application Start Date24 June 2026
Last Date for Online Application23 July 2026
Last Date for Application Fee Payment25 July 2026
Exam / Interview DateTo be notified separately on apscrecruitment.in
Admit CardTo be released on apscrecruitment.in before exam date
Selection Procedure DetailsTo be announced via corrigendum/addendum on apscrecruitment.in

How to Apply for APSC Drilling Engineer Recruitment 2026 – Step by Step Online Application Guide

  1. Visit the official APSC Online Recruitment portal at apscrecruitment.in
  2. If you are a new user, click on the ‘Register Here’ link and complete the One Time Registration (OTR) process by submitting your basic personal, educational, and contact details.
  3. Register with a valid and active email address and mobile number. All future updates and communications from APSC will be sent only to these registered contacts.
  4. After completing OTR, log in using your registered email/mobile number and password.
  5. Update your OTR profile with all required details — educational qualifications, age proof document, and category certificate — before proceeding with the application form, since the Commission fetches these details directly from your OTR.
  6. Navigate to Advertisement No. 06/2026 – Drilling Engineer post and click on Apply.
  7. Read the full notification carefully and fill in the online application form. All mandatory fields marked with an asterisk (*) must be filled without fail.
  8. Upload all required documents in PDF format only. File size should not exceed 4 MB. Scanning at 200 dpi in greyscale is recommended for clarity. Photograph size: 50 KB to 200 KB (not older than 3 months). Signature size: 50 KB to 200 KB.
  9. Use the Preview option before final submission to verify all uploaded documents are clear, correct, and legible.
  10. After previewing, click ‘Proceed to Pay’ and pay the applicable fee — Rs. 297.20/- (General), Rs. 197.20/- (OBC/MOBC), or Rs. 47.20/- (SC/ST/BPL/PwBD) — through available online payment options or via the nearest CSC.
  11. After successful payment, an auto-generated confirmation SMS and email will be sent to your registered contacts.
  12. Take a printout of the submitted Online Application Form and keep it safely for future use at the time of interview or document verification.

Important: No editing or modification in the application form will be permitted after final submission, so double-check all details before clicking Submit. No documents will be accepted after the application is submitted online. Applications not accompanied by fee payment will not be treated as valid. Candidates are strongly advised to apply well before the last date to avoid portal congestion.

👉 Check more latest government job updates on CareerFocusNow

APSC Drilling Engineer 2026 – Documents Required at the Time of Interview and Verification

  • Class-X / Class-XII Examination Admit Card or Pass Certificate or Marksheet clearly showing Date of Birth
  • Mark sheets of all examinations from HSLC level onwards up to the level of qualifying examination (B.E. / B.Tech. in Mechanical Engineering or AMIE Part A & B)
  • Degree Certificate or AMIE Pass Certificate (Mechanical Engineering) from a recognised university/institution
  • Valid Permanent Resident Certificate of Assam as domicile proof
  • Caste Certificate issued by the Government of Assam for SC/ST/OBC/MOBC candidates, clearly indicating the caste, the Act under which it is recognised, and the village/town of the candidate’s ordinary residence
  • BPL Certificate issued by the Government of Assam (if applicable)
  • Experience Certificate, wherever necessary
  • Declaration Form-A related to Assam Public Services (Application of Small Family Norms in Direct Recruitment) Rules, 2019 — downloadable from apsc.nic.in under Forms & Downloads Section
  • NOC from competent authority (for candidates already in regular Assam Government service and seeking pay protection or service continuation)
  • Benchmark Disability Certificate from the competent authority (for PwBD candidates with 40% or more disability)
  • Valid Photo ID proof in original — PAN Card, Driving Licence, Passport, Voter ID Card, Aadhaar Card, or Educational Institution ID Card
  • Printout of the submitted Online Application Form

APSC Drilling Engineer Recruitment 2026 Important Links

ActionLink
Apply OnlineClick Here – apscrecruitment.in
Official Notification PDFDownload Here
APSC Official Websiteapscrecruitment.in

FAQs – APSC Drilling Engineer Recruitment 2026 (Directorate of Geology and Mining, Assam)

Q1. What is APSC Drilling Engineer Recruitment 2026 and how many vacancies are there?

APSC Drilling Engineer Recruitment 2026 is an official government job notification released by the Assam Public Service Commission vide Advertisement No. 06/2026 dated 12 June 2026. The Commission has advertised 01 vacancy for the post of Drilling Engineer in the Directorate of Geology and Mining, Assam under the Mines and Minerals Department of the Government of Assam. The single vacancy is under the Open/Unreserved category. The post carries Pay Band-4 with a pay scale of Rs. 30,000/- to Rs. 1,10,000/- and Grade Pay of Rs. 12,700/- per month, along with all usual allowances as admissible to Assam State Government employees. This is a direct recruitment by APSC and a strong opportunity for Mechanical Engineering graduates in Assam seeking a state government technical job in 2026.

Q2. What is the last date to apply for APSC Drilling Engineer Recruitment 2026?

The last date to submit the Online Application Form for APSC Drilling Engineer Recruitment 2026 is 23 July 2026. The application window opened on 24 June 2026. The last date for payment of the application fee is 25 July 2026, giving candidates two extra days after the application deadline to complete the fee payment. Candidates are strongly advised to apply well before the closing date since last-minute portal congestion is a common issue. APSC will not entertain any application or fee payment received after the respective deadlines. Applications submitted without completing the fee payment will be treated as invalid and will be rejected outright.

Q3. What is the qualification required for the APSC Drilling Engineer post 2026?

For the post of Drilling Engineer under APSC Recruitment 2026, a candidate must hold a Graduation degree in Mechanical Engineering from any University or Institution recognised by the Government. Alternatively, candidates who have passed both Part A and Part B of AMIE (India) in Mechanical Engineering are also eligible, provided they had enrolled in the AMIE course on or before 31 May 2013. Candidates must upload all semester/year-wise mark sheets and the final degree or pass certificate while applying online. The qualification must be updated in the OTR profile on the APSC recruitment portal before filling the application, since the Commission verifies educational qualification details from the OTR profile.

Q4. What is the salary for the Drilling Engineer post in APSC 2026?

The post of Drilling Engineer under APSC Recruitment 2026 carries a pay scale of Rs. 30,000/- to Rs. 1,10,000/- per month with a Grade Pay of Rs. 12,700/-, placed in Pay Band-4 of the Assam State Government pay structure. In addition to the basic pay, the selected candidate will also receive Dearness Allowance (DA), House Rent Allowance (HRA), Travel Allowance (TA), and all other usual allowances as admissible under the rules of the Government of Assam from time to time. The overall pay package under Pay Band-4 with Grade Pay Rs. 12,700/- makes this a financially strong and stable government engineering post for Mechanical Engineering graduates in Assam.

Q5. What is the age limit for APSC Drilling Engineer Recruitment 2026?

The age limit for the APSC Drilling Engineer post is calculated as on 01 January 2026. For General/Unreserved candidates, the minimum age is 21 years and the maximum is 38 years. SC and ST candidates get an upper age relaxation of 5 years, allowing them to apply up to the age of 43 years. OBC/MOBC candidates are eligible up to 41 years with a 3-year relaxation as per relevant Government Notification. Persons with Benchmark Disabilities (PwBD) get the highest relaxation of 10 years regardless of their caste category, meaning they can apply up to the age of 48 years. Age proof will be accepted only from Class-X or Class-XII Board Examination Admit Card/Pass Certificate/Marksheet.

Q6. What is the application fee for APSC Drilling Engineer Recruitment 2026?

The application fee for APSC Drilling Engineer Recruitment 2026 is Rs. 250/- for General/Unreserved candidates, Rs. 150/- for OBC/MOBC candidates, and NIL for SC/ST/BPL/PwBD candidates. In addition, a processing fee of Rs. 47.20/- is charged by CSC-SPV from all applicants, making the total payable amount Rs. 297.20/- for General, Rs. 197.20/- for OBC/MOBC, and Rs. 47.20/- for SC/ST/BPL/PwBD candidates. Payment can be made online through Net Banking, Debit Card, or Credit Card, or through a Common Service Centre (CSC). Once paid, the fee is non-refundable under any circumstances and cannot be transferred to any future APSC examination.

Q7. What is the selection process for APSC Drilling Engineer Recruitment 2026?

The selection process for APSC Drilling Engineer Recruitment 2026 will be announced by the Commission separately through a corrigendum or addendum after the application window closes. Depending on the number of applications received, the process may include a Screening Examination or Written Test followed by a Viva-Voce or Personal Interview. If a written exam is held, it may be conducted zone-wise at six designated zones in Assam — Silchar, Jorhat, Nagaon, Tezpur, Kokrajhar, and Guwahati. Final selection will be based on performance across all stages. Candidates selected will also be required to undergo a medical examination as per the norms of the Assam Government before final appointment. No TA/DA is payable for attending any stage of the selection process. Canvassing in any form leads to automatic disqualification.

Q8. Is Assam domicile mandatory for APSC Drilling Engineer Recruitment 2026?

Yes, being a permanent resident of Assam is absolutely mandatory for applying to APSC Drilling Engineer Recruitment 2026. Only candidates who are Indian citizens as per Articles 5 to 8 of the Constitution of India and are permanent residents of Assam are eligible to apply. As proof of domicile, candidates must upload a valid Permanent Resident Certificate issued in Assam for educational purpose. Alternatively, an Employment Exchange Registration Certificate issued in Assam will also be treated as proof of residency. This domicile document must be updated in the OTR profile before filling the application form. Candidates unable to produce the original domicile proof at the time of interview will not be allowed to appear and their candidature will be cancelled.


Leave a Reply

Your email address will not be published. Required fields are marked *